StandardDev

SCPI Commands :

FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:SDEViation
CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:SDEViation
READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:SDEViation
class StandardDevCls[source]

StandardDev commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tol: float or bool: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.Bluetooth.Measurement.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits, see ‘Modulation limits (LE) ‘.

  • Delta_F_199_P_9: float or bool: No parameter help available

  • Freq_Accuracy: float or bool: No parameter help available

  • Freq_Drift: float or bool: No parameter help available

  • Max_Drift: float or bool: No parameter help available

  • Nominal_Power: float or bool: No parameter help available

  • Freq_Offset: float or bool: No parameter help available

class ResultData[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tol: float: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.Bluetooth.Measurement.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits, see ‘Modulation limits (LE) ‘.

  • Delta_F_199_P_9: float: No parameter help available

  • Freq_Accuracy: float: No parameter help available

  • Freq_Drift: float: No parameter help available

  • Max_Drift: float: No parameter help available

  • Nominal_Power: float: No parameter help available

  • Freq_Offset: float: No parameter help available

calculate() → CalculateStruct[source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:SDEViation
value: CalculateStruct = driver.bluetooth.measurement.multiEval.modulation.lowEnergy.lrange.standardDev.calculate()

Returns the standard deviation of the modulation results for LE coded PHY, see ‘Square TX Measurement - modulation statistics’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:SDEViation
value: ResultData = driver.bluetooth.measurement.multiEval.modulation.lowEnergy.lrange.standardDev.fetch()

Returns the standard deviation of the modulation results for LE coded PHY, see ‘Square TX Measurement - modulation statistics’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:SDEViation
value: ResultData = driver.bluetooth.measurement.multiEval.modulation.lowEnergy.lrange.standardDev.read()

Returns the standard deviation of the modulation results for LE coded PHY, see ‘Square TX Measurement - modulation statistics’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.