StandardDev

SCPI Commands :

CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:EDRate:SDEViation
FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:EDRate:SDEViation
READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:EDRate:SDEViation
class StandardDevCls[source]

StandardDev commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tol: float or bool: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.Bluetooth.Measurement.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits.

  • Omega_I: float or bool: Standard deviation of the initial center frequency error

  • Omega_Iplus_Omega_0_Max: float or bool: Standard deviation of the maximum compensated frequency error

  • Omega_0_Max: float or bool: Standard deviation of the maximum compensated frequency error

  • Rms_Devm: float or bool: Standard deviation of the differential EVM results

  • Peak_Devm: float or bool: No parameter help available

  • P_99_Devm: float or bool: No parameter help available

  • Nominal_Power: float or bool: Standard deviation of the average power during the carrier-on state

class ResultData[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tol: float: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.Bluetooth.Measurement.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits.

  • Omega_I: float: Standard deviation of the initial center frequency error

  • Omega_Iplus_Omega_0_Max: float: Standard deviation of the maximum compensated frequency error

  • Omega_0_Max: float: Standard deviation of the maximum compensated frequency error

  • Rms_Devm: float: Standard deviation of the differential EVM results

  • Peak_Devm: float: No parameter help available

  • P_99_Devm: float: No parameter help available

  • Nominal_Power: float: Standard deviation of the average power during the carrier-on state

calculate() → CalculateStruct[source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:EDRate:SDEViation
value: CalculateStruct = driver.bluetooth.measurement.multiEval.modulation.edrate.standardDev.calculate()

Returns the standard deviation of the modulation results for EDR packets. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:EDRate:SDEViation
value: ResultData = driver.bluetooth.measurement.multiEval.modulation.edrate.standardDev.fetch()

Returns the standard deviation of the modulation results for EDR packets. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:EDRate:SDEViation
value: ResultData = driver.bluetooth.measurement.multiEval.modulation.edrate.standardDev.read()

Returns the standard deviation of the modulation results for EDR packets. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.