Current

SCPI Commands :

CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:BRATe:CURRent
FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:BRATe:CURRent
READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:BRATe:CURRent
class CurrentCls[source]

Current commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tol: float or bool: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.Bluetooth.Measurement.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits.

  • Delta_F_299_P_9: float or bool: Frequency deviation value Δf2 above which 99.9% of all measured Δf2 values occur

  • Freq_Accuracy: float or bool: No parameter help available

  • Freq_Drift: float or bool: No parameter help available

  • Max_Drift: float or bool: No parameter help available

  • Freq_Dev_Avg_F_1: float or bool: No parameter help available

  • Freq_Dev_Min_F_1: float or bool: No parameter help available

  • Freq_Dev_Max_F_1: float or bool: No parameter help available

  • Freq_Dev_Avg_F_2: float or bool: No parameter help available

  • Freq_Dev_Min_F_2: float or bool: No parameter help available

  • Freq_Dev_Max_F_2: float or bool: No parameter help available

  • Nominal_Power: float or bool: Average power during the carrier-on state

  • Mod_Ratio: enums.ResultStatus2: Modulation ratio Δf2 avg / Δf1 avg

class ResultData[source]

Response structure. Fields:

  • Reliability: int: ‘Reliability indicator’

  • Out_Of_Tol: float: Out of tolerance result, i.e. the percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.Bluetooth.Measurement.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits.

  • Delta_F_299_P_9: float: Frequency deviation value Δf2 above which 99.9% of all measured Δf2 values occur

  • Freq_Accuracy: float: No parameter help available

  • Freq_Drift: float: No parameter help available

  • Max_Drift: float: No parameter help available

  • Freq_Dev_Avg_F_1: float: No parameter help available

  • Freq_Dev_Min_F_1: float: No parameter help available

  • Freq_Dev_Max_F_1: float: No parameter help available

  • Freq_Dev_Avg_F_2: float: No parameter help available

  • Freq_Dev_Min_F_2: float: No parameter help available

  • Freq_Dev_Max_F_2: float: No parameter help available

  • Nominal_Power: float: Average power during the carrier-on state

  • Mod_Ratio: float: Modulation ratio Δf2 avg / Δf1 avg

calculate() → CalculateStruct[source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:BRATe:CURRent
value: CalculateStruct = driver.bluetooth.measurement.multiEval.modulation.brate.current.calculate()

Returns the current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for BR packets. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:BRATe:CURRent
value: ResultData = driver.bluetooth.measurement.multiEval.modulation.brate.current.fetch()

Returns the current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for BR packets. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:BRATe:CURRent
value: ResultData = driver.bluetooth.measurement.multiEval.modulation.brate.current.read()

Returns the current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for BR packets. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.